Search found 21 matches
- Sat Feb 24, 2018 5:12 pm
- Forum: Spirit Technical Discussion
- Topic: Trouble Programming Arduino
- Replies: 2
- Views: 9889
Re: Trouble Programming Arduino
it's a bootloader problem sometimes occurring on non-genuine avrdude processors ;-( You'll find a lot of posts on it at this formum. I was lucky to find a way out, decribed here: viewtopic.php?f=18&t=8031&start=10#p9800
- Tue Feb 20, 2018 4:35 pm
- Forum: Spirit Technical Discussion
- Topic: volts.py output problem
- Replies: 49
- Views: 187615
Re: volts.py output problem
In my case the Comm led doesn't blink. AS to the exact content of the message sen aand recied, with a small additiong in spirit:core: ┌────────────────────────────────────────────────────────────────────┐ │ • MobaXterm 10.4 • │ │────────────────────────────────────────────────────────────────────┘ L...
- Wed Feb 14, 2018 10:41 am
- Forum: Spirit Technical Discussion
- Topic: volts.py output problem
- Replies: 49
- Views: 187615
Re: volts.py output problem
With my spirit it's the same result for volts, rangefinder and lightsense
- Mon Feb 12, 2018 3:49 pm
- Forum: Spirit Technical Discussion
- Topic: Spirit_BaseSketch_PiControl upload fails
- Replies: 4
- Views: 11405
Re: Spirit_BaseSketch_PiControl upload fails
I finally dealt with this stubborn problem: viewtopic.php?f=18&t=8031&start=10#p9800
Hopefully that works for you too
Hopefully that works for you too
- Mon Feb 12, 2018 3:41 pm
- Forum: Spirit Technical Discussion
- Topic: volts.py output problem
- Replies: 49
- Views: 187615
Re: volts.py output problem
It's a known bug. You'll find some other posts on this at the forum. The requested rgister isn't returned in the answer from Arduino. When the print statement in spirit_core.py is extended with , i2c_reply[0] and/or , i2c_reply, one can see a list of value 255 ([255,255,255,255]). So the register as...
- Mon Feb 12, 2018 1:19 pm
- Forum: Spirit Technical Discussion
- Topic: Base sketch won't upload
- Replies: 11
- Views: 21594
Finaly got the Base sketch loaded
Don't ask me why, but I got a glitch about power, took the spirit out of the shoebox to give it a final try and got it working! The order of things: start arduino ide, insert usb cable, press power button, wait until RPI is initialized (blue led) and upload the Spirit BaseSketch PI control. Got the ...
- Mon Feb 12, 2018 1:04 pm
- Forum: Spirit Technical Discussion
- Topic: Forward-thinking: Jessie or Stretch? Python 2 or Python 3?
- Replies: 6
- Views: 13454
Re: Forward-thinking: Jessie or Stretch? Python 2 or Python 3?
I upgraded Raspian to Stretch and compiled openCV 3.3. against 2.7 bindings (more libraries/packages available).
I think that's future proof enough for a while ;0)
I think that's future proof enough for a while ;0)
- Mon Feb 12, 2018 9:23 am
- Forum: Spirit Technical Discussion
- Topic: Base sketch won't upload
- Replies: 11
- Views: 21594
Re: Base sketch won't upload
ThnX for the support! I'm using Windows 10 and the devicemanager shows the com-port when I plug in. Properties tell me the supplier is FTDI and it's the newest version. Uninstalling the device and install it again, doesn't change anything. I usualy work in Visual Studio (intellisense & solutions...
- Sun Feb 11, 2018 9:47 pm
- Forum: Spirit Technical Discussion
- Topic: Base sketch won't upload
- Replies: 11
- Views: 21594
Re: Base sketch won't upload
Yep I used exactly those params. I also tried Arduino duemilanove as board for this board has a special usb virtual usb programmer. Out of pure boredom I also tried every other arduino board/processor combination. Useless of course, but just to exclude possibilities. Years ago the small Dagu boards ...
- Sun Feb 11, 2018 8:17 pm
- Forum: Spirit Technical Discussion
- Topic: Base sketch won't upload
- Replies: 11
- Views: 21594
Re: Base sketch won't upload
Good suggestion to upgrade the ide: it comes with the adafruit usb driver. But unfortunately: ik keep getting the uploader error: avrdude: stk500_recv(): programmer is not responding, avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x96. I think I now tried all possible combinations of ...