Search found 32 matches
- Fri Mar 04, 2016 2:22 am
- Forum: Wink Basics
- Topic: mac Capitan Has no usb port option
- Replies: 4
- Views: 11840
Re: mac Capitan Has no usb port option
I helped a friend with a problem like this last night. The usb drivers were installed in a PC laptop, but when we plugged in the programming board, the computer didn't recognize it. In this case, it was the USB cable. The plugs were all the right size :-), but for some reason the cable didn't work. ...
- Fri Mar 04, 2016 2:19 am
- Forum: Wink Basics
- Topic: Minor compilation warning work-around
- Replies: 5
- Views: 13155
Re: Minor compilation warning work-around
I did some research. The current Wink PreLoadedDemo and BaseSketch being distributed are these: Wink_PreLoadedDemo_Rev01 Version 1.0 12/2015 Wink_BaseSketch_Rev01_03 Version 1.3 01/2016 And compilation of the PreLoadedDemo is clean and warning-free, as are the bulk of the lesson code examples, likel...
- Thu Mar 03, 2016 7:30 pm
- Forum: Wink Basics
- Topic: Does connecting connector wrong way break Wink ?
- Replies: 6
- Views: 13519
Re: Does connecting connector wrong way break Wink ?
It sounds like the battery was being shorted out, discharging high current and heating it all up. I don't know if there is any thermal cutoff on Wink. I doubt it. But the battery circuit may have something built in. Or the battery was discharged and needs cooling and charging again. This is somethin...
- Thu Mar 03, 2016 4:34 pm
- Forum: Wink Basics
- Topic: Does connecting connector wrong way break Wink ?
- Replies: 6
- Views: 13519
Re: Does connecting connector wrong way break Wink ?
Hmm. That's probably something I don't want to test. :) So, we should get a few more specifics from you to figure out exactly what you mean. 1) Now, when connected correctly, does the Wink "charging" light come on? 2) In what way was the cable connected incorrectly? Plug upside down? Plug ...
- Sat Feb 27, 2016 11:18 pm
- Forum: Wink Basics
- Topic: Minor compilation warning work-around
- Replies: 5
- Views: 13155
Minor compilation warning work-around
In the Wink PreLoaded behavior and template, I'd been seeing the following compile warning message: sketch\WinkHardware.h:249:20: warning: 'irData' initialized and declared 'extern' [enabled by default] extern byte irData[]={0x00,0xFF,0x00,0x00}; In the current WinkHardware.h Rev 01.01 file, I found...
- Sat Feb 27, 2016 11:03 pm
- Forum: Wink Basics
- Topic: Success with Wink IR Remote Upgrade
- Replies: 1
- Views: 9283
Success with Wink IR Remote Upgrade
After declining the IR remote upgrade before first shipment, and after playing with Winks for some time, I began to crave the IR Upgrade and regretted skipping it. PlumGeek folks were happy to help. I ordered two IR receiver devices and one remote transmitter, all under $10. The package arrived toda...
- Sat Feb 27, 2016 5:36 am
- Forum: Ringo Code Share
- Topic: Wink - idle mode
- Replies: 2
- Views: 9711
Re: Wink - idle mode
Nice! This fixes the very first problem I had with Wink. When I first tried to program it, I turned it on and it went into the PreLoaded routine. It surprised me, so pushed the "stop" button, and it did, and the charge light was still on, so I thought it was on. Couldn't download a program...
- Sat Feb 27, 2016 5:21 am
- Forum: Wink Basics
- Topic: Example Ambient Light Sensor Averaging
- Replies: 0
- Views: 16450
Example Ambient Light Sensor Averaging
I was ready to try some barrier detection with my new Wink. But my sensor readings bounced around a bit. So, I did some research on sensor averaging algorithms, found some complex array implementations that would average each reading with the 8 previous readings. That worked, but was more than I nee...
- Fri Feb 19, 2016 8:39 am
- Forum: Wink Basics
- Topic: Code - Barrier detect
- Replies: 7
- Views: 14721
Re: Code - Barrier detect
Sorry Sil. I know you started the thread on Barrier Detection, but you mentioned something not working, and my debugging habits took over. At your suggestion, I just posted a simple test usage of random() and randomSeed() capabilities. See it here: http://forum.plumgeek.com/viewtopic.php?f=13&t=...
- Fri Feb 19, 2016 8:06 am
- Forum: Wink Basics
- Topic: Random Number Generation
- Replies: 1
- Views: 15797
Random Number Generation
As a side outcome of another thread, I decided to play with Arduino random number generation, to help clear up some confusion. 1) The Arduino documentation describes the native random() function: https://www.arduino.cc/en/Reference/Random random() can take either one or two arguments. Here are two e...