forward motor

Wink setup, hardware, basic programming. User to user support.
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
bigroad
Posts: 2
Joined: Thu Jul 12, 2018 10:40 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

forward motor

Postby bigroad » Thu Jul 12, 2018 10:43 pm

Is there a way to reset wink robot? motors(100,100) or any number to make him moves forward is not working. He keeps spinning. Thank you.

Kevin
Posts: 180
Joined: Tue Jul 28, 2015 12:56 am
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: forward motor

Postby Kevin » Fri Jul 13, 2018 4:31 pm

Hello bigroad,

There is no way to "reset" the robot, but it sounds like one of the motors isn't making contact with the surface. You may need to slide the motor down a bit in the clip that holds it. Just be careful of the wires going into the motor, and if you need to slide it upward, don't press directly on the motor shaft.

Let me know if that works.

Thanks,
-Kevin

bigroad
Posts: 2
Joined: Thu Jul 12, 2018 10:40 pm
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Re: forward motor

Postby bigroad » Fri Jul 13, 2018 7:50 pm

that worked! thank you!


[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
[phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable

Who is online

Users browsing this forum: No registered users and 28 guests