forward motor
-
- Posts: 2
- Joined: Thu Jul 12, 2018 10:40 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
forward motor
Is there a way to reset wink robot? motors(100,100) or any number to make him moves forward is not working. He keeps spinning. Thank you.
-
- Posts: 180
- Joined: Tue Jul 28, 2015 12:56 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: forward motor
Hello bigroad,
There is no way to "reset" the robot, but it sounds like one of the motors isn't making contact with the surface. You may need to slide the motor down a bit in the clip that holds it. Just be careful of the wires going into the motor, and if you need to slide it upward, don't press directly on the motor shaft.
Let me know if that works.
Thanks,
-Kevin
There is no way to "reset" the robot, but it sounds like one of the motors isn't making contact with the surface. You may need to slide the motor down a bit in the clip that holds it. Just be careful of the wires going into the motor, and if you need to slide it upward, don't press directly on the motor shaft.
Let me know if that works.
Thanks,
-Kevin
-
- Posts: 2
- Joined: Thu Jul 12, 2018 10:40 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: forward motor
that worked! thank you!
Who is online
Users browsing this forum: No registered users and 1 guest