WINK | IR & Trouble with Wink & Ringo Preloaded behaviors
Posted: Mon Feb 08, 2016 6:02 pm
I currently have 3 Winks all arriving with the WINK_Demo_Software. When activiated:
Each Wink plays through the demo behaviors
I can use the reset button on the WINK to change different behaviors
The IR WINK does not respond to the remote when in Demo mode - Should it?
I've tested my Remote using a camera to see IR light. I can confirm my remote is working with power.
When I install the Ringo_PreLoaded_Behaviors_Rev06_01 (after loading to my arduino files):
My Ringo sits with both eyes blue
No response to the remote on the IR Wink
It appears I can upload both the Ringo preloaded behaviors and the Wink Demo Software, but I don't seem to be able to do anything else.
Should I be building my example sketches using the Ringo base sketch or the Wink base sketch? As the include files seem very different.
Each Wink plays through the demo behaviors
I can use the reset button on the WINK to change different behaviors
The IR WINK does not respond to the remote when in Demo mode - Should it?
I've tested my Remote using a camera to see IR light. I can confirm my remote is working with power.
When I install the Ringo_PreLoaded_Behaviors_Rev06_01 (after loading to my arduino files):
My Ringo sits with both eyes blue
No response to the remote on the IR Wink
It appears I can upload both the Ringo preloaded behaviors and the Wink Demo Software, but I don't seem to be able to do anything else.
Should I be building my example sketches using the Ringo base sketch or the Wink base sketch? As the include files seem very different.