Re: Base sketch won't upload
Posted: Mon Feb 12, 2018 9:23 am
ThnX for the support! I'm using Windows 10 and the devicemanager shows the com-port when I plug in. Properties tell me the supplier is FTDI and it's the newest version. Uninstalling the device and install it again, doesn't change anything. I usualy work in Visual Studio (intellisense & solutions/projects with sources in multiple different languages) I have a dozen of old and current projects at hand. All with arduino(s)+Rpi. VS does a clean upload for all of them (several uno's, several mega's) Just to be sure I installed the arduino ide version 1.8.5. That works the same. Unfortunately not alone for all my other projects, but also for Spirit ;-( I would say this aks for a brutal burn with a chip programmer (in which case I use another arduino), but the spirit lacks some pins to do that. Without the ability to upload a basic sketch, I cannot solve the comms-problems with spirit_core.py. (I realy donnot see a workaround in python or linux there.) I consider it pure bad luck and spirit went off this morning to a shoebox in the garage. Maybe one day it'll be scavangedf or the Rpi and/or battery. Again: thnX for the support!