pin mapping between Raspberry Pi and main board connector?
Posted: Fri Feb 23, 2018 3:15 am
Would it be possible to get some documentation on that big connector between the Raspberry Pi and the main board? (Also the XBee, Bluetooth, WiFi connectors - but the big one is the GPIO.)
I've been going through the Python code but I can't find any clear definitions.
As far as I can tell, the spidev.py default config doesn't seem to match the pin numbering in the Arduino sketch. However, it clearly works.
My goal is to see if I can set up programming of the Arduino from the Pi as described here:
Kevin, this would be a great help!
I've been going through the Python code but I can't find any clear definitions.
As far as I can tell, the spidev.py default config doesn't seem to match the pin numbering in the Arduino sketch. However, it clearly works.
My goal is to see if I can set up programming of the Arduino from the Pi as described here:
Kevin, this would be a great help!