Serial port not showing up.

Ringo setup, hardware, basic programming. User to user support.
Kevin
Posts: 181
Joined: Tue Jul 28, 2015 12:56 am

Re: Serial port not showing up.

Postby Kevin » Mon Aug 17, 2015 11:09 pm

Okay everyone, I've got some answers.

The problem is with the USB port connector. Some of them were placed slightly too far to the right and some of the pins are not making reliable contact with the board. They were supposed to be all tested before shipping, but I suspect a few un-tested panels ended up being split up and dumped in the "already tested" bin.

After much testing here on the stock will still have in the shop, we found this same issue on a handful of programmers.

I am sending out replacement programmers today to the following people. If I missed you, let me know and I'll get yours out tomorrow. We're also including a return shipment label - can you please put the bad programmer back in the same envelope and return it to us? It's a quick fix for us. The replacement units have been tested and inspected and should work fine.

Sorry again for the hassle. It was actually good news for us - as I was afraid something was happening to the FTDI chip itself, which is rather expensive and not an easy fix to remove/replace.

People getting new programmers today:

DCHook
weirdbal
trent
cheif039
kreiggers
princeoffools
MTBguy

MikeH
Posts: 1
Joined: Tue Aug 18, 2015 12:16 am

Re: Serial port not showing up.

Postby MikeH » Tue Aug 18, 2015 12:19 am

I'm having the same problem. One of the programmers will charge the ringo but the other won't and neither one will show up after drivers are installed. Tried it on my Windows7 and Mac using a cable that works with my other arduino boards. How do I get replacements?

Kevin
Posts: 181
Joined: Tue Jul 28, 2015 12:56 am

Re: Serial port not showing up.

Postby Kevin » Tue Aug 18, 2015 12:39 am

Hey Mike,

I'll add you to the list.

If anyone else is having this issue, please send email to support at plumgeek dot com.

I'm not sure how many people will be effected, and emailing in will make it much easier to track the cases and get them resolved.

If you are experiencing this problem, please try the programmer on more than one computer and with more than one USB cable if possible. This issue can be driver related rather than a hardware problem, so if we can identify anyone having a software problem it'll help sort out the hardware cases.

If you want to do a DIY fix yourself, it's pretty easy if you have some flux and a small tip soldering iron (a good magnifying glass or microscope may be necessary also). Firstly you can identify which of the USB contacts are loose: Using the end of a tweezers or x-acto blade, try to slightly wiggle each USB contact side to side. If it wiggles, it needs to be tacked down to restore operation. To tack it back down: What you want to do is drench the electrical contacts of the USB port with flux. Then using a good hot iron, heat the leads and press them downward. Keep pressure for a few seconds and let the flux cook off. This should restore contact with the pads. Inspect for bridged solder joints afterward. If you get bridges, use some more flux and re-heat. Depending on your flux you may want to rinse the area with alcohol and a q-tip.

Thanks for the cooperation and sorry again for the hassle. I guess there had to be some sort of bump with the rollout eh? It could have been worse.

ringo207
Posts: 4
Joined: Sat Aug 08, 2015 11:47 pm

Re: Serial port not showing up.

Postby ringo207 » Tue Aug 18, 2015 12:51 am

My serial port isn't showing up. I tried to different computers running windows 7. I will submit via the contact tab on the plum geek site for a replacement programmer board.

pixiepurls
Posts: 4
Joined: Tue Aug 18, 2015 2:10 am

Re: Serial port not showing up.

Postby pixiepurls » Tue Aug 18, 2015 2:24 am

Hello all,

Mine arrived today.

I installed the driver first. I downloaded all the code samples, installed Arduino. I found a compatible cable (in my box of cables).

My Arduino says "port" not "serial port" that it says in the Ringo guide PDF. Just an FYI had me worried but I assumed my version must be newer.

The red light turns on when I am all plugged in.

OS X Yosemite

Updated Java

Image

I can't get the ports to show up for USB as mentioned in the PDF guide. :(

darrylr
Posts: 1
Joined: Tue Aug 18, 2015 9:47 pm

Re: Serial port not showing up.

Postby darrylr » Tue Aug 18, 2015 9:50 pm

Kevin, apparently I too have one of the programmers with the USB connector problem. I've sent an email to your support alias.

Darryl

kreiggers
Posts: 7
Joined: Fri Aug 14, 2015 3:36 am

Re: Serial port not showing up.

Postby kreiggers » Sat Aug 22, 2015 10:47 pm

Thanks Kevin! The new programmer arrived today — plugged it in and it was recognised okay!

FTDI drivers were already installed from previous attempts on a MacBook Pro running OS X 10.10.5 w Arduino IDE 1.6.5

With the old programmer; nothing shows up under /dev when plugged in:

Code: Select all

$ ll /dev/cu.*
crw-rw-rw-  1 root  wheel   17,   1 Aug 15 21:21 /dev/cu.Bluetooth-Incoming-Port
crw-rw-rw-  1 root  wheel   17,   3 Aug 15 21:21 /dev/cu.Bluetooth-Modem
✓ ~/dev
$ ll /dev/tty.*
crw-rw-rw-  1 root  wheel   17,   0 Aug 15 21:21 /dev/tty.Bluetooth-Incoming-Port
crw-rw-rw-  1 root  wheel   17,   2 Aug 15 21:21 /dev/tty.Bluetooth-Modem
✓ ~/dev


Plugging in another Arduino-thing I get a new entry:

Code: Select all

$ ll /dev/tty.*
crw-rw-rw-  1 root  wheel   17,   0 Aug 15 21:21 /dev/tty.Bluetooth-Incoming-Port
crw-rw-rw-  1 root  wheel   17,   2 Aug 15 21:21 /dev/tty.Bluetooth-Modem
crw-rw-rw-  1 root  wheel   17,   6 Aug 15 22:53 /dev/tty.usbmodemfa131
✓ ~/dev


Now with the new programmer:

Code: Select all

$ ll /dev/tty.*
crw-rw-rw-  1 root  wheel   17,   0 Aug 15 21:21 /dev/tty.Bluetooth-Incoming-Port
crw-rw-rw-  1 root  wheel   17,   2 Aug 15 21:21 /dev/tty.Bluetooth-Modem
crw-rw-rw-  1 root  wheel   17,   8 Aug 22 15:20 /dev/tty.usbserial-DA01HVEV
✓ ~/dev
$ ll /dev/cu.*
crw-rw-rw-  1 root  wheel   17,   1 Aug 15 21:21 /dev/cu.Bluetooth-Incoming-Port
crw-rw-rw-  1 root  wheel   17,   3 Aug 15 21:21 /dev/cu.Bluetooth-Modem
crw-rw-rw-  1 root  wheel   17,   9 Aug 22 15:20 /dev/cu.usbserial-DA01HVEV
✓ ~/dev


I've now successfully uploaded the behaviours sketch and it works!

Thanks again for the quick turn-around.

MTBguy
Posts: 4
Joined: Fri Aug 14, 2015 1:28 am

Re: Serial port not showing up.

Postby MTBguy » Sun Aug 23, 2015 3:37 pm

I just wanted to let you guys know that I received the new programmer in the mail yesterday, and it now shows up perfectly. Thank you for quickly resolving this issue. I will be mailing the defective unit back to you on Monday. Now off to the world or Arduino and Ringo for me!

pixiepurls
Posts: 4
Joined: Tue Aug 18, 2015 2:10 am

Re: Serial port not showing up.

Postby pixiepurls » Mon Aug 24, 2015 9:42 pm

I got mine and something shows up, I uploaded the sketch but have no idea what I am doing hah! The remote doesn't seem to work as I expected and I have no OOP experience so I'll keep cracking. I get something under "tools > serial" under /dev/cu.usbserial which appears to be correct so thank you for sending it so quick, I just have to figure out how to use it! :D

trent
Posts: 6
Joined: Wed Aug 12, 2015 12:22 am

Re: Serial port not showing up.

Postby trent » Tue Aug 25, 2015 12:24 am

Got mine in the mail today and seems to work fine. Thanks! Dropped the old one back in the mail right away. Thanks again.


Who is online

Users browsing this forum: No registered users and 1 guest