Kevin,
Arduino 1.0.5 compiles and uploads, but not seamlessly. Sometimes it takes a few attempts at uploading. It lists the port as tty.
I can't upload at all from Arduino 1.6.5, which only lists the port as cu. I get the errors in the previous post. When trying to upload, the programmer either doesn't blink, blinks once, or blinks a lot like it is uploading but then hangs.
Thanks for replying
OS X 10.10 Driver/Port Issues
-
- Posts: 15
- Joined: Sat Oct 17, 2015 9:57 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: OS X 10.10 Driver/Port Issues
I suddenly experienced a day and a half of "programmer is not responding" error messages. I could write and compile new code but could not get it into Ringo. This message appeared doggedly after consistently receiving good verifying and compiling results.
In frustration, I uninstalled the FDTI driver [using Terminal] and the Arduino 1.6.5 app, along with all the Ringo libraries.
I then did a fresh install, and for one run of the 'Ringo_PreLoaded_Behaviors' I could both verify and upload. Then I got the dreaded "programmer is not responding" error message again – no matter how many re-boots and checks on the Tool menu of my port and board settings.
Then I saw Kevin's 10/22 post about ±3-blinks on the board's [nonTx/Rx] leds, and did a deliberate programming cable disconnect and reconnect. All is working again.
Damn the small stuff!!!
I am making some progress toward my modified DriveWithRemote goal. See separate thread: "Ringo Code Share" > "Drive by Remote - expanded".
In frustration, I uninstalled the FDTI driver [using Terminal] and the Arduino 1.6.5 app, along with all the Ringo libraries.
I then did a fresh install, and for one run of the 'Ringo_PreLoaded_Behaviors' I could both verify and upload. Then I got the dreaded "programmer is not responding" error message again – no matter how many re-boots and checks on the Tool menu of my port and board settings.
Then I saw Kevin's 10/22 post about ±3-blinks on the board's [nonTx/Rx] leds, and did a deliberate programming cable disconnect and reconnect. All is working again.
Damn the small stuff!!!
I am making some progress toward my modified DriveWithRemote goal. See separate thread: "Ringo Code Share" > "Drive by Remote - expanded".
-
- Posts: 10
- Joined: Tue Sep 15, 2015 3:37 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: OS X 10.10 Driver/Port Issues
Programming ringo didn't use to be problem
but now I suddenly can't program anymore, I keep getting a programmer not responding error.
I tried to disconnect and connect the cable several times. even letting it rest for a while but it still doesn't work.
help!
http://arduinobootcamp.xyz
but now I suddenly can't program anymore, I keep getting a programmer not responding error.
I tried to disconnect and connect the cable several times. even letting it rest for a while but it still doesn't work.
help!
http://arduinobootcamp.xyz
Who is online
Users browsing this forum: No registered users and 11 guests