How to... newb
-
- Posts: 1
- Joined: Tue Sep 12, 2017 11:10 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
How to... newb
So I don't normally put things like this together. I was able to do the first few steps and get things attached but to tighten them how do you do it?? The screws are so tiny. I tried pressing my finger on the screw head as hard as I could and then turning the nut but it didn't tighten. Also anyone have a kit they recommend on amazon for tools to do this? I tried two tiny leatherman screwdrivers neither was small enough
- TomTheWhittler
- Posts: 29
- Joined: Wed Sep 13, 2017 5:04 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: How to... newb
I think what you are looking for is called a "Jewelers Precision Screwdriver Set"
https://www.amazon.com/Stanley-66-039-J ... B00002X29G
Sometimes they are called just "Precision Screwdriver Set"
https://www.lowes.com/pd/Kobalt-10-Piec ... e/50135070
http://www.acehardware.com/product/inde ... =104606386
or maybe "eyeglass screwdriver"
http://www.acehardware.com/product/inde ... Id=1265547
https://www.amazon.com/Stanley-66-039-J ... B00002X29G
Sometimes they are called just "Precision Screwdriver Set"
https://www.lowes.com/pd/Kobalt-10-Piec ... e/50135070
http://www.acehardware.com/product/inde ... =104606386
or maybe "eyeglass screwdriver"
http://www.acehardware.com/product/inde ... Id=1265547
Research is the only place in a company where you can continually have failures and still keep your job.
I knew immediately that was where I belonged.
I knew immediately that was where I belonged.
- TomTheWhittler
- Posts: 29
- Joined: Wed Sep 13, 2017 5:04 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: How to... newb
I am in the middle of my build. These parts are tiny. Having the right tools help. Suggest using a plastic coffee can lid , plastic shoe box lid or something along these line to corral the tiny screws.
Using a Craftsman 41676 PH000x40 Phillips screw driver from a set of Craftsman 12-pc Micro-tech Expert Screwdriver set #941670. It is working very well.
This is from a set I got 20 years ago. Sadly I can not find any current listings.
They look a little like this Ebay listing.
http://www.ebay.com/itm/Precision-Screw ... 2052317985?
Kevin should have thrown a cheap Phillips Screwdriver and a miniature pliers into the kit.
I am using a Xcelite NN54 minature pliers like this listing. A bit pricey. I am sure there are cheaper knock offs.
http://www.ebay.com/itm/Xcelite-Slim-Li ... 2452358133?
Using a Craftsman 41676 PH000x40 Phillips screw driver from a set of Craftsman 12-pc Micro-tech Expert Screwdriver set #941670. It is working very well.
This is from a set I got 20 years ago. Sadly I can not find any current listings.
They look a little like this Ebay listing.
http://www.ebay.com/itm/Precision-Screw ... 2052317985?
Kevin should have thrown a cheap Phillips Screwdriver and a miniature pliers into the kit.
I am using a Xcelite NN54 minature pliers like this listing. A bit pricey. I am sure there are cheaper knock offs.
http://www.ebay.com/itm/Xcelite-Slim-Li ... 2452358133?
Research is the only place in a company where you can continually have failures and still keep your job.
I knew immediately that was where I belonged.
I knew immediately that was where I belonged.
-
- Posts: 180
- Joined: Tue Jul 28, 2015 12:56 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: How to... newb
I had pretty good luck with the little screwdriver included with standard eye glasses repair kits. Most of the stores around our area have them and they're fairly inexpensive.
Having some good narrow tweezers is a big help as well. They are kid of expensive for tweezers, but I'm a big fan of the Tweezerman brand. You can find them in the cosmetics section in most stores, as well as Amazon.
I use this set to hold the nuts in place - the wide jaw fits the flats of the nuts well...
https://www.amazon.com/Tweezerman-Stain ... tweezerman
Then I use a narrow set like this to reach into narrow places (I also use these for doing small surface mount repairs on the boards)....
https://www.amazon.com/Tweezerman-1300- ... erman&th=1
The nuts we received are smaller than I expected. They have the same thread size but they are thinner so the flats are smaller. When I first started building them I was a bit worried but once I installed a few of the screws it got easier.
Having some good narrow tweezers is a big help as well. They are kid of expensive for tweezers, but I'm a big fan of the Tweezerman brand. You can find them in the cosmetics section in most stores, as well as Amazon.
I use this set to hold the nuts in place - the wide jaw fits the flats of the nuts well...
https://www.amazon.com/Tweezerman-Stain ... tweezerman
Then I use a narrow set like this to reach into narrow places (I also use these for doing small surface mount repairs on the boards)....
https://www.amazon.com/Tweezerman-1300- ... erman&th=1
The nuts we received are smaller than I expected. They have the same thread size but they are thinner so the flats are smaller. When I first started building them I was a bit worried but once I installed a few of the screws it got easier.
-
- Posts: 1
- Joined: Sat Aug 29, 2015 10:28 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: How to... newb
I found the best way is to get hold of some surgical forceps.
You can use them to lock all the nuts in both to get them started and also to tighten them.
Hope that helps my sprit is all made on my kitchen table.
He looks great
Good luck all
You can use them to lock all the nuts in both to get them started and also to tighten them.
Hope that helps my sprit is all made on my kitchen table.
He looks great
Good luck all
- sil
- Posts: 40
- Joined: Thu Oct 01, 2015 1:04 am [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: How to... newb
yep, clamping forceps to hold nuts and jewellers screwdriver to tighten screws.
I only have one arm to use and have mine mostly built so far using those two tools. work in a plastic tray of some sort a piece of electrical tape or blutak (the squishy stuff you hang paper on the wall with) to help hold screw in place fo me to turn over to place spacers and nuts as required. Once nuts take hold I clamp with forceps and turn over so I can tighten screw with screw driver. Works perfect. As instructions repeat: READ BEFORE doing ANYTHING and be PATIENT, if a one handed person can build this and you're failing maybe its not for you.
steve
I only have one arm to use and have mine mostly built so far using those two tools. work in a plastic tray of some sort a piece of electrical tape or blutak (the squishy stuff you hang paper on the wall with) to help hold screw in place fo me to turn over to place spacers and nuts as required. Once nuts take hold I clamp with forceps and turn over so I can tighten screw with screw driver. Works perfect. As instructions repeat: READ BEFORE doing ANYTHING and be PATIENT, if a one handed person can build this and you're failing maybe its not for you.
steve
Who is online
Users browsing this forum: No registered users and 10 guests