OS X 10.11 (El Capitan) driver question
-
- Posts: 13
- Joined: Fri Aug 07, 2015 8:02 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: OS X 10.11 (El Capitan) driver question
Before you go further make sure the switch on the programmer board is in ON position.
-
- Posts: 3
- Joined: Wed Dec 23, 2015 8:58 pm [phpBB Debug] PHP Warning: in file [ROOT]/vendor/twig/twig/lib/Twig/Extension/Core.php on line 1266: count(): Parameter must be an array or an object that implements Countable
Re: OS X 10.11 (El Capitan) driver question
@PeteM: thanks for the quick feedback.
As it turns out, the Apple FTDI driver on El Capitan worked for me.
My problem was apparently related to the order everything needs to be connected:
1. Turn on Ringo
2. Connect Ringo to programming board
3. Connect programming board to Mac
4. Open Arduino IDE
5. Deploy code to Ringo
I'm not 100% certain about that but I can confirm that I was able to push code to Ringo using the standard Apple FTDI driver in El Capitan.
Regards,
Abe
As it turns out, the Apple FTDI driver on El Capitan worked for me.
My problem was apparently related to the order everything needs to be connected:
1. Turn on Ringo
2. Connect Ringo to programming board
3. Connect programming board to Mac
4. Open Arduino IDE
5. Deploy code to Ringo
I'm not 100% certain about that but I can confirm that I was able to push code to Ringo using the standard Apple FTDI driver in El Capitan.
Regards,
Abe
Who is online
Users browsing this forum: No registered users and 11 guests