forward motor

Wink setup, hardware, basic programming. User to user support.
bigroad
Posts: 2
Joined: Thu Jul 12, 2018 10:40 pm

forward motor

Postby bigroad » Thu Jul 12, 2018 10:43 pm

Is there a way to reset wink robot? motors(100,100) or any number to make him moves forward is not working. He keeps spinning. Thank you.

Kevin
Posts: 181
Joined: Tue Jul 28, 2015 12:56 am

Re: forward motor

Postby Kevin » Fri Jul 13, 2018 4:31 pm

Hello bigroad,

There is no way to "reset" the robot, but it sounds like one of the motors isn't making contact with the surface. You may need to slide the motor down a bit in the clip that holds it. Just be careful of the wires going into the motor, and if you need to slide it upward, don't press directly on the motor shaft.

Let me know if that works.

Thanks,
-Kevin

bigroad
Posts: 2
Joined: Thu Jul 12, 2018 10:40 pm

Re: forward motor

Postby bigroad » Fri Jul 13, 2018 7:50 pm

that worked! thank you!


Who is online

Users browsing this forum: No registered users and 3 guests