forward motor

[bigroad]

Is there a way to reset wink robot? motors(100,100) or any number to make him moves forward is not working. He keeps spinning. Thank you.

[Kevin]

Hello bigroad,

There is no way to "reset" the robot, but it sounds like one of the motors isn't making contact with the surface. You may need to slide the motor down a bit in the clip that holds it. Just be careful of the wires going into the motor, and if you need to slide it upward, don't press directly on the motor shaft.

Let me know if that works.

Thanks,
-Kevin

[bigroad]

that worked! thank you!